Extrusion

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...

Introducing the new Silicone Sock-X, specially tailored for the Nextruder Hotend on the Prusa MK4 and XL printers. Retaining a similar design to our socks for the Prusa Mini and MK3, and high heat resistance of up...

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...

This Bi-metal heatbreak solves heat creap issues caused by the standard heatbreak on the Prusa Mini. The heatbreak is made from copper and titanium, this allows it to heat up...

This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and printers with V6 (compatible) hotends.The diameter tolerances are very high, resulting in better prints than low-quality nozzles.  Package contents:  1x...

This thermistor uses the same sensor from Semitech as the one originally on the Prusa Mini for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini....

The new socks for Revo nozzles help keeping your nozzle clean, and lowering the convection heat from the nozzle to the printed part, slightly increasing the print quality. The socks...

Do you need a replacement heater block for the Prusa Mini, and are you looking for a small upgrade? Or do you want to get the most out of your...

This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and other printers with V6 (compatible) hotends.The overall length is the same as a V6 nozzle, but the tip is a...

This kit consists of: Hotend Thermistor - for Prusa MK4 Heater Cartridge - for Prusa MK4/XL

This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and printers with V6 (compatible) hotends. Because this nozzle is made of hardened steel, it wears way less than standard...

This Nextruder Heaterblock is made from nickel-plated copper. With this heater block, your hotend heats up faster, and the maximum flow rate is slightly higher than it would be with an...

The Galileo 2 G2E is a drop-in replacement for the Clockwork extruder that's used in the Voron Stealthburner. It features a planetary gearbox, with a 9:1 gear ratio. This kit includes...

This Nextruder Heaterblock is an affordable, high-quality Prusa MK4/XL heaterblock alternative. 100% compatible with the original hotend, it can be quickly and easily installed to get you printing again quickly...

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. This new generation is made from a far superior material in a...

This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. This new generation is made from a far superior material in a...

This Titanium heatbreak solves heat creap issues caused by the standard heatbreak on the Prusa Mini! Package contents: 1x Titanium Heatbreak, for Prusa Mini (+)1x Thermal Paste, 0.5g1x PTFE tube The installation guide...

This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...

This is a standard heater block for the Prusa Mini (+), made from aluminium.  Package contents: 1x Aluminium Heater Block1x Screws to mount the heater and thermistor cartridge1x Silicone Sock-V2, For...

This thermistor uses the same sensor from Semitech as the one originally on the Prusa MK2/3(S)(+) for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini. The...

Silicone Sock-X is now available for the Bambu Lab Hotend. Made from durable silicone, with high heat resistance of up to 300°C, the sock ensures a perfect fit and reliable protection...

The sensor is a drop-in replacement for the Prusa MK4. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...

This kit consists of: Hotend Thermistor - for Prusa XL Heater Cartridge - for Prusa MK4/XL

It's time to unlock the full power of your Prusa Mini (+), with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve...

The Panda Touch is a 5'' touchscreen developed for the P1 series of Bambu Lab printers. Features: Plug-and-play convenience. Enjoy hassle-free setup with a quick installation that does not void...

The Smart Orbiter V3.0, is one of the most compact, lightweight, direct drive extruder solutions on the market. This smart extruder features all of the following: Copper heater block with...

This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...

These are the standard Stealthburner Toolhead PCBs supplied with the LDO voron kits (that support the stealthburner toolhead). These PCBs are to be mounted in the stealthburner toolhead, the other...

The GammaMaster® Nozzle is the next evolution in nozzle technology, forged from the latest advancements in metallurgy and surface preparation technology. For too long, you have had to settle for...

Introducing the new Silicone Sock-X, specially tailored for the E3D V6 Hotend. With a similar design to the MK2/3(S)(+), and high heat resistance of up to 300°C, the sock ensures a perfect fit...

Hard to the Core - Slice Engineering's Vanadium Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface.  Crafted from...

This is the standard Stealthburner Breakout PCB supplied with the LDO voron kits (that support the stealthburner toolhead). This PCB is to be mounted near the mainboard of your 3D...

This is the spare temperature sensor for a Rapido Plus 2 hotend from Phaetus, it can also be used for the standard Rapido 2 hotend, but this does require changing...

The sensor is a drop-in replacement for the Prusa XL. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...

The Dragon Hotend UHF is made with a focus on high-speed printing. You can easily change the nozzle, without having to hold a heaterblock. It's easy to mount with the E3D...

This is a replacement for the 24V 72W heatercore on the Smart Orbiter V3.0. It's exactly the same model, from LDO Motors.

This new Smart Filament Sensor V2.0 from BigTreeTech uses optical rotary encoders and mechanical switches to detect filament. With these sensors, the filament sensor is also capable of detecting jams. You...

The Rapido hotend is made with focus on high-speed printing and convenience. You can easily change the nozzle, without having to hold a heaterblock. It heats up evenly because of...

The Rapido hotend is made with a focus on high-speed printing and convenience. You can easily change the nozzle, without having to hold a heaterblock. It heats up evenly because of...

This is a replacement heatbreak for the Smart Orbiter V3.0. 

Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...

This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...

The Dragonfly hotend by Phaetus is an all-metal hotend, with a nickel-plated copper heater block, and unique conical bi-metal heatbreak. Due to the copper heater block, it can be heated to...

The High Flow Revo Nozzles from E3D are ideal for fast printing, or using larger nozzles.

These are original Revo Nozzles from E3D, this is the standard flow version. 

This is an official heatbreak for the Dragonfly hotend from Phaetus. It's compatible with both the Dragonfly BMS and BMO versions. Package contents: 1x Heatbreak - Dragonfly BMS/BMO - Phaetus

This Volcano/PH from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures up...

This Volcano/PH from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures up...

Upgrade your Prusa Mini 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to...